HB-5639, As Passed House, December 5, 2018






























     A bill to amend 1949 PA 300, entitled


"Michigan vehicle code,"


(MCL 257.1 to 257.923) by adding section 217i.




     Sec. 217i. (1) Notwithstanding any other provision of this


act, the secretary of state shall, upon an applicant's payment of


the proper fees and submission of all documentation required by the


secretary of state, issue a vehicle identification number in the


same manner as provided in section 230 and a certificate of title


to an assembled vehicle that satisfies all applicable requirements


of this act, if the assembled vehicle contains all of the following




     (a) Headlights. As used in this subdivision, "headlights"

includes 1 headlight on each side, and high- and low-beam




     (b) Front and rear turn signals.


     (c) At least 1 taillight. If the vehicle is equipped with 2


taillights, both taillights shall be in working order.


     (d) Registration plate light.


     (e) Brake lights.


     (f) Horn.


     (g) Bright light indicator.


     (h) Windshield wipers.


     (i) Windshield washers.


     (j) Brake equipment as required under section 705.


     (k) Safety belts. This subdivision only applies to 1965 and


newer model vehicles.


     (l) Safety glass windshield. The windshield required under


this subdivision shall not be made of plexiglass, shall be of a


sufficient size to protect the driver of the vehicle and


passengers, shall be free of any cracks or obstructions, and shall


be made of a transparent material.


     (m) Except as otherwise provided in subdivision (n),


adjustable outside rearview mirror on the driver's side.


     (n) Outside rearview mirror on each side of the vehicle. This


subdivision only applies to a truck with a half-ton or more




     (o) Bumpers. This subdivision only applies to a passenger


vehicle. The bumpers required under this subdivision shall be


between 14 and 22 inches above the ground when the vehicle is not

in 4-wheel drive.


     (p) Tires. The tires required by this subdivision shall have


2/32-inch tread, shall not have exposed cord or tread separation,


and shall be approved for use by the United States Department of




     (q) Exhaust. The exhaust required by this subdivision shall be


in good working order and shall not produce excessive noise. If the


original design of the exhaust included a tailpipe and resonator,


the exhaust shall include a tailpipe and resonator.


     (r) Differential gear.


     (2) As used in this section and subject to subsection (3),


"assembled vehicle" means 1 or more of the following:


     (a) A vehicle that is built from new or used materials or


parts by a person not recognized as a manufacturer.


     (b) A vehicle that has been altered or modified to the extent


that it no longer reflects its original manufacturer configuration.


     (c) A vehicle that has had its body replaced with a different


style of body unit from another vehicle.


     (d) A vehicle that has been assembled from a kit.


     (e) An off-road vehicle, regardless of whether the original


manufacturer's certificate of origin specifies that the vehicle is


an off-road vehicle.


     (3) As used in this section, "assembled vehicle" does not


include either of the following:


     (a) A military surplus vehicle designated by the federal


government as off-road use only.


     (b) A gray market off-road minitruck.

     (c) An all-terrain vehicle that has 4 wheels and is equipped


with a straddle seat.


     Enacting section 1. This amendatory act takes effect 90 days


after the date it is enacted into law.